Tub to Shower Conversion in Meridian, Idaho
Say alcove width, tile or acrylic, and the town. We quote the pan, the drain, and the walls. We are not a franchise one-day liner pitch.
Free estimate.
- Free estimates
- Treasure Valley
- Local crew
- One number
Tub to Shower Conversion in Meridian, Idaho
Meridian Quality Shower Conversions handles tub to shower conversion in Meridian, Idaho. We pull builder 60-inch tubs, set pans, waterproof walls, and reset mixing valves across Ada County. Walk-in showers, alcove conversions, acrylic surrounds, and tile shower packages are the jobs that come through this number. South of I-84, Old Town along Pine, and custom streets north of McMillan all sit on the same list.
Call (208) 274-7129 with the town, the alcove width, and whether you want acrylic, tile, or a low curb. Same week estimates in most cases. Photos of the tub apron and the drain help. We quote before the tub comes out.
Residential Tub to Shower Conversion Services in Meridian
Most houses here are production stock from the last 25 years. The bath is a 60-inch alcove with a fiberglass combo, a builder valve, and a surround that is already chalking at the corners.
Tub to shower conversion
The head job is tub out, pan in, walls, and valve. We do not glue a liner over a leaking apron and call it done. Drain location, slope, and the wet wall set the clock. See tub to shower conversion for the sequence.
Walk-in shower
A walk-in is a low curb or a true curbless floor. Access is the point. The drain and the waterproofing have to carry water to the trap without a tub dam. Details live on walk-in shower .
Shower remodel
Keep the footprint. Replace the surround and the pan. This is not a whole-bath gut. Failed grout, a soft pan, or a kit that flexed are the usual triggers. See shower remodel .
Alcove shower
The 60-inch production bay. Ten Mile, Locust Grove, and Kuna plats repeat this size. Three walls, a curb, and a door or curtain. Alcove shower is that bay, not a neo-angle corner.
Shower pan
Mud pan or a preformed base. Quarter-inch per foot to the drain is the whole job. Weep holes and a clamping drain matter on a mortar bed. Shower pan is the floor, not the walls.
Acrylic shower
Multi-piece surrounds on a sound backer. Faster than tile. Still needs a right drain and a rigid wall. A kit on rotten gypsum is a callback. See acrylic shower .
Tile shower
Custom tile on a converted alcove is a conversion package, not a kitchen floor or a backsplash. Membrane first, then tile. Tile shower is the wet-area set.
Accessible shower
Low curb, blocking for grab bars, and a valve you can reach from a seat. Not a medical claim and not a Medicare pitch. See accessible shower .
Tub replacement
Keep a tub, swap the unit. Different job from converting to a shower. Same-size alcove swaps are the common path. Tub replacement is for houses that still want a soak.
Shower doors
Framed bypass, pivot, or frameless. Measure after the walls are in. Glass ordered off the old tub flange will miss. See shower doors .
Shower walls
Cement board and membrane, acrylic panels, or solid surface. The waterproofing behind the finish is the spec. Shower walls stop at the stall, not the rest of the house.
Fiberglass shower
One-piece or multi-piece units. Hall width is the limit on a one-piece. Production houses often cannot turn a full unit at the bath door. See fiberglass shower .
Corner shower
Neo-angle and square corners. Different pan, different glass, not a 60-inch alcove. Hall baths and kids' rooms use this footprint. Corner shower .
Shower valve
Pressure-balance or thermostatic mixing valve in a conversion. Height and scald protection are code items under the International Plumbing Code. See shower valve .
Bathroom conversion
The whole wet wall, the floor at the old tub, and the door swing. More than a surround kit. Bathroom conversion is the layout job.
Why Meridian Property Owners Call Meridian Quality Shower Conversions
Meridian counted 117,635 people in 2020. It is Idaho's second-largest city and the fastest-growing in the state. The town was platted in 1893 on homestead land and named for the Boise Meridian. Irrigation from the Nampa-Meridian and Settlers districts turned dry bench into farms. Most houses went up after 1990 on that former ground.
The baths fail in a short list. Builder combo tubs in 60-inch alcoves. Surrounds that chalk at the corners after a decade of hard water. Pans that hold water because the slope died. Valves that surge when a toilet flushes. Old Town stock along Pine, Main, and Meridian Road still mixes plaster with gypsum. North of McMillan the plats are master-planned. South of I-84 the new-construction belt is still moving.
We set pans to drain. We waterproof to ANSI A118.10 membranes or a sheet system in the same family. Mixing valves follow ASSE 1016 practice. Idaho adopted the International Plumbing Code; Uniform Plumbing Code language shows up in product listings. Those are industry documents, not a credential of this brand.
Treasure Valley summers pass 100 F. Thin caulk at an acrylic joint cooks and splits. Winters are cold with light snow, so a slab-on-grade pan that was set on a January pour needs the room warm enough for thinset and silicone. Elevation here is about 2,599 feet. Humidity stays low. That is why we talk about expansion gaps, not a national one-day clock.
Call (208) 274-7129 with the job and the town. We quote before demolition starts. We convert baths across Ada County.
Our Tub to Shower Conversion Process
Measure the alcove and the drain
We need the city, the alcove width, and a photo of the tub apron. Center drain or offset drain changes the pan. A window on the wet wall changes the surround. We do not quote a franchise kit price from another market as if it were your bath.
Pull the tub and open the wet wall
The apron comes out. We check the subfloor, the trap, and the backer. Soft gypsum behind a kit gets cut to the studs. The tub spout is capped when the job is a shower only. Mixing valve height is set for a standing shower, not a sit-down soak, unless you asked for a seat.
Set the pan and waterproof
Preformed acrylic pans or a mortar bed with a liner. Slope runs 1/4 inch per foot toward the drain. Sheet membrane or a liquid-applied layer on the walls. A flood test on the pan before the finish goes on. We do not skip that test to match a one-day ad.
Walls, valve, and glass
Acrylic panels, tile on a membrane, or a multi-piece fiberglass unit. Pressure-balance or thermostatic trim. Doors measured after the walls are true. Silicone at every change of plane. You use the shower after the cure window on the quote, not the morning after a liner drop.
Areas We Serve
We work from Meridian across Ada County and into Canyon County. Dedicated pages: Boise , Nampa , Eagle , Kuna , Star , Caldwell , Garden City , Middleton , Emmett , Hidden Springs , south Meridian , and Melba . Call (208) 274-7129 if your town is next door and the job is a real conversion.
Paramount, Bridgetower, Tuscany, Century Farm, and Lochsa Falls are the plats we name because that is where the 60-inch alcoves actually sit. Corridors along Chinden Boulevard, Eagle Road, Fairview, Ten Mile, Locust Grove, Linder, McMillan, and Lake Hazel carry the houses. Landmarks such as The Village at Meridian, Settlers Park, Julius M. Kleiner Memorial Park, and the Meridian Idaho Temple mark the map, not a shop address.
If you searched tub to shower conversion in Meridian, Idaho, the number on this page is the one to use. We quote the bath in front of you. West Ada schools, the Idaho State Police campus, and Renaissance Park in Tuscany sit on the same map as the houses we convert. They are landmarks, not a shop.
Questions
How do we get a tub to shower conversion estimate?
Call or text with the town, alcove width if you know it, and whether you want acrylic, tile, or a walk-in curb. A photo of the tub apron and the drain helps. We bid after we look at the alcove. Same week looks in most cases. There is no charge for that visit.
Are you Bath Fitter or a one-day liner company?
No. Some franchise ads sell a same-day surround over the old tub. We do not. We pull the tub, set a pan with slope to the drain, waterproof the walls, and set the valve to plumbing-code practice. The schedule follows that assembly, not a billboard.
What does a tub to shower conversion usually cost?
Angi publishes a national band of $1,200 to $15,000, with many jobs near $3,000. HomeAdvisor lists $1,500 to $8,000 for a typical conversion. Fixr puts the average near $4,000. Those are published guides, not our menu. Drain moves and tile raise the quote.
Who shows up to do the conversion?
Calls go to an independent local conversion crew that takes work from this site. That contractor sets the price, the schedule, and the agreement with you. These pages describe the trade: pan, membrane, mixing valve, and glass. Ask that crew about credentials. They are not printed here.
Can I keep a tub in another bathroom?
Yes. Many Meridian houses convert the primary alcove and leave a tub in a hall bath. If this is the only full bath, say so. Buyers still look for one tub in a lot of listings. We will still convert when you want a walk-in more than a soak.
Do I need a permit for a tub to shower conversion?
Plumbing changes usually do. Meridian and Ada County follow the Idaho-adopted International Plumbing Code. Mixing valves, scald protection, and the drain are inspection items. The independent crew on this number files Meridian and Ada County plumbing paperwork the stall needs. We do not skip a pan flood test to save a day.
Ready for a shower conversion estimate in Meridian?
Tub out, shower in. Tile or acrylic. Free estimate, no obligation.