Acrylic Shower in Meridian, Idaho
Multi-piece surrounds on a rigid wall. Faster than tile. Still needs a pan that drains.
Free estimate.
- Free estimates
- Treasure Valley
- Local crew
- One number
This job covers
- Three-panel kit on a new listed pan
- Thicker solid-surface look panels
- Molded soap ledge and shampoo recess
- Tear-out of a prior skin on the old tub
Acrylic Shower in Meridian, Idaho
Meridian Quality Shower Conversions installs acrylic shower surrounds in Meridian when you want panels instead of tile and you still want the tub out. Production alcoves take a three-piece kit on a listed pan. The backer has to be rigid. A kit on rotten gypsum is a callback.
Call (208) 274-7129 with alcove width and a photo of the current walls. We quote panels on a sound plane.
Acrylic Shower Options for Meridian Properties
Panels are not all the same job. Three-piece kits on a new pan, solid-surface look sheets, molded ledges, and a tear-out of a prior skin each change the backer.
Three-panel kit on a new listed pan
The common path. Pan first, then wall panels that match the width. Inside corners get a joint the maker specified. We fasten into studs or into a backer that can hold the screw. Hollow gypsum is not that backer.
Thicker solid-surface look panels
Some owners want a stone look without a mud job. These sheets still need a flat wall and a pan that matches. Seams are fewer. The stall is still not a one-day liner over a tub.
Molded soap ledge and shampoo recess
Factory recesses beat glue-on dishes. They have to land where the studs allow. We place the panel so the recess is not over a valve or a window. Cutting a recess on site in thin acrylic is how cracks start.
Tear-out of a prior skin on the old tub
If a liner already covers the combo, we pull it and the tub. The new acrylic shower sits on a pan, not on the old apron. Hidden rot at the flange is expected. That board comes out.
How We Handle Acrylic Shower Work in Meridian
- We measure the pocket and check the backer with a probe at the flange.
- Tub or old kit comes out. Soft board is cut to the studs.
- Pan, flood test, then panels on a dry, flat wall. Joints follow the kit.
- Valve trim and glass or a curtain. Silicone at every change of plane. Use waits on the kit's window.
Materials and Methods
Acrylic stalls are a system. Listed pan, matching wall panels, and a drain the pan was made for. Backer is cement board or a wet-area board, not paper-faced gypsum in the spray. Fasteners hit studs. Silicone or the kit's color joint at corners. Pressure-balance valve through a hole the panel allows. International Plumbing Code still governs the trap. Uniform Plumbing Code marks on the pan are listings. Expansion gaps matter in dry, hot summers. We do not crush the panel with over-driven screws.
What Acrylic Shower Work Costs in Meridian
HomeAdvisor publishes acrylic materials at $500 to $2,500. Angi lists acrylic inserts around $500 to $2,000. Full conversion bands on Angi and HomeAdvisor still run $1,200 to $8,000 when a tub comes out. Three movers: backer repair, pan versus reuse, and glass. We quote the surround and the floor.
Acrylic kits versus liner-over-tile pitches
Ads in the valley sell a one-day skin. The pitch is speed. The old tub stays. Water still sits in that basin. Our acrylic shower work is a conversion or a stall rebuild: pan, panels, joints.
July heat on a west bath can cook a joint that was too thin. We use the gap the maker wants. We do not sell the billboard clock.
Call (208) 274-7129 with width and a photo of the flange if the kit already failed.
Questions
How do I get an acrylic shower estimate in Meridian?
Name alcove width, the city, and send photos of the existing walls. Say if a kit already sits on the tub. We quote panels and a pan, not a liner glued to a leaking apron. Soft gypsum behind the old kit changes the bid because that board comes out.
Is acrylic the same as a franchise one-day liner?
No. A liner often stays on the old tub. Our acrylic shower work sets a pan and panels on a sound backer after the tub is gone, or on a stall that already exists. Joints still need silicone. The stall is not a morning drop on a rotten wall.
Will acrylic yellow or crack in a Meridian summer?
Cheap thin panels can chalk. A listed, thicker surround holds up better under hard water and heat. Expansion gaps at the corners matter in a house that hits 100 F in July. We follow the maker's joint spec. Pinning panels tight with no gap is how cracks start.
Can you put acrylic over existing tile?
Only if the tile is sound, the drain height still works, and the maker allows it. Loose tile is a tear-out. Extra thickness can bury the glass channel. We would rather open the wall than trap a leak behind a second skin.
Do acrylic walls need a pan to match?
Yes. A three-panel kit is made to a pan size. Mixing a 32-inch pan with 30-inch walls leaves a joint that caulk cannot hide. We order the surround as a system. Soap ledges that are molded in are part of that system, not a glue-on dish.
What do guides say acrylic surrounds cost?
HomeAdvisor lists acrylic shower materials around $500 to $2,500. Angi puts prefabricated acrylic inserts about $500 to $2,000. Installed conversion totals sit in the larger $1,200 to $8,000 band. Backer repair and a new pan move the number. We quote the kit and the wall.
Ready for a shower conversion estimate in Meridian?
Tub out, shower in. Tile or acrylic. Free estimate, no obligation.