Tile Shower in Meridian, Idaho
Custom tile on a converted alcove. Waterproofing first. Not a kitchen floor and not a backsplash.
Free estimate.
- Free estimates
- Treasure Valley
- Local crew
- One number
This job covers
- Large-format porcelain on a converted alcove
- Mosaic floor on a mortar bed
- Niche and half-wall tile package
- Tile walls on a listed acrylic pan
Tile Shower in Meridian, Idaho
Meridian Quality Shower Conversions handles tile shower work in Meridian when the alcove is coming out of a tub and the finish you want is tile, not a kit. Membrane first. Tile second. This is a stall package. It is not kitchen floors and it is not a range backsplash.
Call (208) 274-7129 with alcove size and a photo of the wet wall. We quote the stall, not kitchen floors or a backsplash.
Tile Shower Options for Meridian Properties
A tiled conversion is still a conversion. Large-format walls, mosaic floors, a niche package, and a hybrid with a listed pan each change the mud and the glass.
Large-format porcelain on a converted alcove
Production 60-inch bays take porcelain on a flat, waterproofed wall. We flatten the plane before the sheet goes up. Lippage at eye height is the callback. This tile stops at the stall. Adjacent bath floors are not in this scope.
Mosaic floor on a mortar bed
Small tesserae follow the slope to a point drain. The bed is mortar on a liner with a clamping drain. Weep holes stay open. This floor is the stall floor, not a hall tile run.
Niche and half-wall tile package
A recessed niche and a pony wall for glass need blocking and a waterproof box before tile. The half-wall cap is a water table. Grout on that cap fails. Silicone belongs there.
Tile walls on a listed acrylic pan
Hybrid. Pan handles the floor. Tile handles the walls. The membrane must die into the pan flange. This is faster than a full mud floor and still a tile look on the three walls.
How We Handle Tile Shower Conversion in Meridian
- We measure the bay and decide pan versus mud floor from the drain and the joists.
- Tub out. Backer on. Sheet or liquid membrane. Corners tooled.
- Flood test. Then thinset and tile. Movement joints stay open for silicone.
- Grout, glass, and a cure window. You stay out until that date.
Materials and Methods
Tile in a stall is a system. Cement board or foam backer. ANSI A118.10 membrane. Mortar bed with CPE liner and clamping drain, or a listed pan with a proper flange tie-in. Thinset matched to porcelain. Grout on the field. Silicone at every change of plane. TCNA stall details are the industry map, not a badge. Mixing valve through a waterproofed hole. International Plumbing Code on the trap. We do not set tile on paper-faced gypsum in the spray. We do not grout the curb-to-wall joint.
What Tile Shower Conversion Costs in Meridian
Fixr lists ceramic tile shower installation from $6,000 to $12,000. Angi puts custom tiled walk-ins around $3,500 to $15,000. HomeAdvisor per-square-foot tile bands are wide because they mix floors and walls. Three movers here: mud floor versus listed pan, porcelain versus mosaic labor, and frameless glass. We quote the alcove as a stall.
Tile showers in dry air and freeze-thaw winters
Meridian summers are hot and dry. Thinset skins fast. That can help a schedule and can skin a ridge if we rush a large tile. Winters freeze. A stall that was used before grout cured will show it at the corners after the first cold snap.
Hard water leaves a film on grout. That is maintenance. It is not a reason to skip the membrane. We still flood-test.
This page does not cover kitchen floors or backsplashes. Those are a different trade site. The tile here is the conversion package: pan, walls, niche, glass.
Call (208) 274-7129 with the bay size when the finish you want is tile in the stall.
Questions
How do I get a tile shower conversion estimate in Meridian?
Text alcove size, the city, and whether the tub is still in. Photos of the wet wall help. We quote a stall: pan, membrane, and tile. We do not quote a kitchen floor or a range backsplash on this number. Same week looks in most cases after we see the bay.
Is a tile stall just grout on cement board?
No. Cement board is a backer, not the waterproofing. A sheet membrane or a liquid-applied layer that meets ANSI A118.10 goes on the board. Tile and grout sit on that. Grout is not a membrane. That is the failure we open on old stalls.
Can you tile a stall and use an acrylic pan?
Yes. A listed pan with tile walls is a hybrid many production bays take. The wall membrane has to terminate into the pan flange the way the pan maker wants. A mud-bed floor is the other path when you want tile underfoot too.
Do large-format tiles work in a 60-inch shower?
They can. Lippage shows under a side light. Walls have to be flat. We back-butter. Movement joints at changes of plane stay silicone, not grout. Tiny mosaics on the floor help slope. That mix is a stall package, not a whole-house tile job.
How long before I can use a tiled shower?
Thinset and grout need dry time. Low humidity here helps in summer and fights you in a cold January bath. We put the use date on the quote. Early use is how grout washes and how a corner joint opens.
What do cost guides say for a tiled shower?
Fixr publishes ceramic tile shower installation around $6,000 to $12,000. Angi lists custom tiled walk-ins from about $3,500 to $15,000. HomeAdvisor tiling bands overlap at a wide per-square-foot range. Membrane, pan type, and glass move the bid. We quote the stall.
Ready for a shower conversion estimate in Meridian?
Tub out, shower in. Tile or acrylic. Free estimate, no obligation.